Post by swelartlasceice on May 27, 2019 20:05:32 GMT 7
Main category: Education
Sub category: Science
Developer: Mike Wesemann
Filesize: 10240
Title: Plot2 Pro
➥ j.mp/2X3zJmN
➡ Plot2 Pro vers 2.6.12
[+] Real-time (literally) price updates in the Menu Bar.
On Jan 15, 2005, at 00:19, Michael McFarlane wrote: > I have a question. Is there currently a way to get the current > position of > the mouse with respect to a given plot? I know that I can get the > mouse > position via the event handler when the mouse is clicked, but I'd like > to > get the mouse position at other times as well. Is this possible? Possible, yes. Implemented, no. The main reason that it is not implemented is that the communication between the client and AquaTerm is very high level (i.e. easy to use) but not really designed to handle the amount of traffic this might generate. Another reason is that selecting a plot in the client doesn't neccessarily make that plot "focused" from the view of the user, thus one might be querying the coords of something he/she can't see... All that aside, any view (plot) can compute the position of the mouse (-cursor) wrt its own coordinate system when asked to do it. If your need is read the coords a few times per second, then it is not very hard to implement. Trace the method -setAcceptingEvents: from AQTAdapter.m --> AQTClientManager.m --> (declared in AQTClientProtocol.h) --> AQTPlot.m and implement a -cursorPosition method returning an NSPoint struct following the same trail. This is synchronous so your process will block until you get the result back. You _could_ do this by a implenting a mouseMovedEvent, but that would likely generate a lot of unneccessary traffic. Hope this helps, Per
CheS-Mapper (Chemical Space Mapper) is a open source 3D-viewer for chemical datasets of small molecules, a publication in the Journal of Chemiformatics describes an early version of the application DOI: 10.1186/1758-2946-4-7, and there is a review here.
Hello Per, Thanks a lot (to you and Hazen) for your response. 1) I did compile PGPLOT much earlier (from source code) and made it work with AQT 0.3.0. I installed AQT 1.0 using binary (DMG) file recently. it appears that PGPLOT is broken: even though demo programs (in /usr/local/pgplot) run, they do not show plots in AQT (even though they call on AQT1.0). 2) the output for "otool" command is as below: > @@@@@@@@@@@@@@@@@@@@ otool command START > mythila:/usr/local/pgplot ashish$ otool -L > /usr/local/pgplot/ > /usr/local/pgplot/ > /usr/local/lib/ (compatibility version 0.0.0, > current version 0.0.0) > /usr/X11R6/lib/ (compatibility version 6.2.0, > current version 6.2.0) > /Library/Frameworks/amework/Versions/A/ AquaTerm > (compatibility version 1.0.0, current version 1.0.0) > > /System/Library/Frameworks/amework/Versions/C/ > Foundation (compatibility version 300.0.0, current version 500.59.0) > /usr/lib/ (compatibility version 1.0.0, > current version 71.1.4) > @@@@@@@@@@@@@@@@@@@@@@@@@@@@@ END i understand i may have issues with amework and versions. what do i do to make it go away? my most recent attempts to build PGPLOT using source code have failed (i use 10.3.9 on my iBook). the latest error message i get is attached below: > @@@@@@@@@@@@@@@@@@@@@@@@ PGPLOT install error > mythila:/usr/local/pgplot ashish$ sudo make > Password: > g77 -O -o pgpack /usr/local/src/pgplot/fonts/pgpack.f > /var/tmp//ccSnVIvq.s:298:section difference relocatable subtraction > expression, "LC6" minus "L1$pb" using a symbol at the end of section > will not produce an assembly time constant > /var/tmp//ccSnVIvq.s:298:use a symbol with a constant value created > with an assignment instead of the expression, L_const_sym = LC6 - > L1$pb > /var/tmp//ccSnVIvq.s:297:section difference relocatable subtraction > expression, "LC6" minus "L1$pb" using a symbol at the end of section > will not produce an assembly time constant > /var/tmp//ccSnVIvq.s:297:use a symbol with a constant value created > with an assignment instead of the expression, L_const_sym = LC6 - > L1$pb > make: *** [] Error 1 > @@@@@@@@@@@@@@@@@@@@@@@@@@@@@ END If I do need to reinstall PGPLOT, how do i go about, in the light of the error above (and other similar ones that i may get). Again thanks a lot. -- ashish On 16-Jan-06, at 0:07, Per Persson wrote: > Ashish, > > If I understand things correctly you've been using AQT 0.3.x with your > own app, using libpgplot for the drawing. > It looks to me as if that libpgplot was compiled with support for AQT > 0.3.x, not AQT 1.0. > > * How did you install AQT 1.0 and PGPLOT? (self-compiled, Fink, > DarwinPorts, other?) > * what does 'otool -L /path/to/' return? > Unless is lists amework (or if you are > using an older 1.0 alpha-release) you need to reinstall PGPLOT. > > Most likely you will need to rebuild/reinstall libpgplot with support > for AQT 1.0 > PGPLOT nowadays have built-in support for AQT 1.0 so any recent > version of PGPLOT should build "out of the box". > > I'll be traveling for the better part of next week, so I'm cc:ing the > list and Hazen Babcock whos is a member of both the AquaTerm and > PGPLOT projects, but I'll follow this up when I get back. > > /Per > > > On Jan 12, 2006, at 04:39, ashish asgekar wrote: > >> Hello Per >> I am using AquaTerm on my iBook with 10.3.9 >> I had been using AQT for plotting with PGPLOT and >> it had been a success with v0.3.5. >> With v 1.0 that was broken. I have been calling pgplot >> from a C++ program and everything goes fine, except >> after calling AQT. No plot window appears, even though >> AQT app is opened and runs subsequently (so my path >> names appear ok). >> >> I tried to follow your directions in an earlier mail (quoted >> below) without success. Would you be able to help me further? >> what do you mean by "rebuild libpgplot"? "reinstall pgplot" >> or "use ranlib"? it is a shared lib (there is file there). >> how do i recompile that? or should i be asking these questions >> elsewhere? >> >> ******** you wrote >> "You will however need to rebuild your libpgplot, see adapter >> folder for details. If you are lucky, then your libpgplot was >> built as a shared lib and you only need to recompile >> and install that." >> ******* (see more at the end of my email) >> >> >> Is there any other log which may tell me what could >> be wrong with AQT settings ?
; style="text-decoration:none;color:#000000">Click To Confirm
This project started in 1993 with SciPlot on NeXTStep and was updated at the end of November 2014. Plot2 is designed for everyday plotting, it is easy to use, it creates high quality plots, and it allows easy and powerful manipulations and calculations of data.
Updated version macpkg.icu/?id=20194&kw=kiu.vers.2.3.4.plot2.pro.tar.gz (9216 KB)
El Captan macpkg.icu/?id=20194&kw=xfgbxx-ver-2.9.12-Plot2-Pro.pkg (11161 KB)
The equation above plotted in Grapher.
App Icon Generator
· Create new plan for particular date period
Hello folks, I'm currently using AquaTerm and gnuplot to produce plots of various parameters in my programme. The programme can produce quite a few plots and my screen gets quite full. I would be interested to know if a aquaterm figure window from gnuplot can be embedded in a NSWindow. This way I would have one window. My idea is to have the plots that gnuplot generates stored as thumbnail in a draw at the side of the window. They you scroll through the draw to display the plot you want. I am fairly experience with objective-c and C but my cocoa skills are not so good. How do I make a start on this? Can an aquaterm window be embedded into a separate app in this way? Is there an Xcode plugin that will allow me to make a NSWindow that contain aquaterm output? Lots of questions! Kind regards, Daniel.
There are more Data Analysis tools here.
s 0 # Start at nonce 0 # next plot start at (-s value) + (-n value)
This is a model for a currency type. The supported currencies are defined in Resources/
.. all your careful plotting right at your fingertips...
{11571 kbytes} Crack VER. 2.2.10 PLOT2 PRO J3FTE2 4.6.12 OS X
{11161 kbytes} App v.2.6.15 Plot2 Pro C7r 2.9.12 German version
{8704 kbytes} Torrent 2.6.4 Plot2 Pro Yz8M8 2.3.7 Recomended! version
{8396 kbytes} App Plot2 Pro 2.6.9 biTQZ 2.4.0 Language Portuguese
{9932 kbytes} Software VER 2.6.16 PLOT2 PRO WFNF3 2.2.5 Featured! version
{9625 kbytes} Crack fdIlw v.2.2.4 Plot2 Pro 2.6.10 Best OS X
{8601 kbytes} Free vers.2.3.6 Plot2 Pro 3oswvn 2.6.15 Updated! version
for El Captan XA1_VERSION_2.7.5_REQUIREMENTS_MANAGER.DMG [9912 kb] 2.8.1
Latest! version MOBIRISE.5.10.0.IDP6.APP [74014 kb] 4.10.1
Hack IdTEO_DreamShot_ver._3.1.4.app [8753 kb] 3.0.9